Focal Adjustment:
Power on
the fi
xture and remove the barrel by unscrewing it from the middle of
the fix
ture. Be sure to
never look directly at the LED while the
fixtu
re is on.
Now, move the primary op
tic
as close to the LED as possible and the secondary op
tic
as far from the LED
as possible on the op
ti
c slider rails. You may need to loosen the set screws on the primary and
secondary op
tics
in order to slide them along the rails.
Slowly begin sliding the secondary op
tic
toward the LED un
til t
he projected image comes into focus. This
will be the narrowest focused beam the
fix
ture can achieve.
This picture shows the
fix
ture in its narrowest beam con
fi
gu
rati
on
Primary Optic
Secondary Optic