Q.uick Start Guide
Q.brixx
16
Gantner Instruments Inc.
USA | China | Singapore | India | Austria | Germany | France | Sweden
1550 Hotel Circle N ∙ Suite 180 ∙ San Diego CA ∙ 92108 ∙ T +1 888 ∙ 512 ∙ 5788
[email protected]
www.gantner-instruments.com
In the situation where the AC to DC adapter cannot be used, simply provide 10-30
VDC from a standard power supply; use LEMO connector part #
FGJ.1B.302.CLLD42Z.
SENSOR CONNECTIONS
Standard Terminal Blocks
The Q.brixx system uses the same blue 10-pin terminal block that is on a standard
Q.bloxx module. Sensor leads connect directly to these terminal blocks. If necessary,
these terminal blocks are detachable from the main body of the module (for simpler
installations and/or swapping sensor types).
PIN assignment for a specific sensor type is displayed in ICP100 during the channel
configuration process (more details in a section below). These connections are also
available in the Q.brixx manual.
Example:
Special Connectors
The PIN connections for any special connections (DB9, BNC, mini TC, etc.) are
available in the Q.brixx Manual.