background image

GAT ECO.Lock 7xxx F/ISO 

 

2             

HB_GAT-ECOLock-7xxxFISO--EN_12  

 

 

www.gantner.com

 

  Copyright 2017-

2018 

by GANTNER Electronic GmbH, Schruns (Austria). 

Operating instructions, manuals and software are protected by copyright. All rights are reserved. Copying, duplication, translation, 
installation in any electronic medium or machine-readable form in whole or in part is prohibited. The sole exception is represented 
by creation of a back-up copy of software for own use as a safeguard, so far as this is technically possible and recommended by 
us. Any infringement will render the party committing such infringement liable to compensation payment. 
 

Liability 

Any claims against the manufacturer based on the hardware or software products described in this manual shall depend 
exclusively on the conditions of the guarantee. Any further-reaching claims are excluded, and in particular the manufacturer 
accepts no liability for the completeness or accuracy of the contents of this manual. The right is reserved to make alterations, and 
alterations may be made at any time without prior notice being given. 
 

Trademarks 

Attention is drawn at this point to markings and registered trademarks used in this manual. All product and company names, which 
are mentioned in this manual, are only used for identification and explanation purposes. Some of these names may be trademarks 
or registered trademarks of the corresponding company. 
 

Contact 

The contact information for questions regarding this product or for general enquiries is listed below: 
 

Contact address of manufacturer: 

GANTNER Electronic GmbH 

 

Montafonerstrasse 8 
6780 Schruns, Austria 

 

Phone: 

+43 5556 73784 - 0  

 

Fax: 

+43 5556 73784 - 8020 

 

 

Email: 

[email protected]   

 

Website: 

www.gantner.com   

 

 
 
 
 
 
 

 
 
 
 
 
 
 
 

 

 

Содержание Mifare Gat ECO.Lock 7 F/ISO Series





















































Отзывы: