Hydromette
®
BL Compact TF-IR 2
22
Using the
"M"
button, a new measurement can then be carried out immediately.
The Hydromette BL Compact TF-IR 2 has 7 different setting modes. The selected mode changes the
display of the measuring menu. Depending on the mode, the appropriate physical dimension is also
displayed. According to the selected measuring mode and the associated physical units, the
maximum values (and the minimum values) are also evaluated and saved. In detail, these are:
Measuring mode
Maximum and minimum value
"Dew point IR" (rh / ir / dp)
Dew point in °C
"Surface temperature IR" (rh / t / ir)
IR surface temperature in °C
"Relative humidity" (rh / t / rh)
Relative humidity in r.h.%
"Air temperature" (rh / t / t)
Air temperature in °C
"Dew point dp" (rh / t / dp)
Dew point temperature in °C
"Equilibrium wood moisture content" (rh / t
/ EMC)
EMC value in weight%
"Absolute humidity" (rh / Ah)
Absolute humidity in g/m³
Minimum value display
5.3.5
The lowest measured value of a measurement series is displayed together with the "
Min
" display
symbol.
A dash at the position of the measured value indicates
that there is no minimum value (yet).
If an existing minimum value should be deleted, the
displayed value must be selected by
briefly (< 1 second)
pressing the "
M
" button.
The value flashes and can now be deleted by
pressing
and holding (> 1 second)
the "
M
" button. A dash at the
position of the measured value indicates the successful
deletion of the value.
The device returns to the measuring mode by
briefly (< 1
second)
pressing the "
M
" button again.
Using the
"M"
button, a new measurement can then be carried out immediately.
Measuring
Menu
Press Down button 4
times
Figure 5-25: Minimum
value display
Figure 5-26: Deleted
minimum value
