17
Hydromette
®
BL Compact TF-IR 2
Measuring mode selection
5.3.2
The device is delivered with the measuring mode "Dew point IR"
(rh / lr / dp) as factory setting.
The device must be switched on and in the main measuring mode to be able to make the measuring
mode settings. Press the "
Down
" button once to access the measuring mode selection. If the setting
for the measuring mode should be changed now, the "
M
" button must be pressed
briefly
(< 1
second)
.
The measuring mode display flashes and can be set using the
Up
and
Down
buttons. The change is
saved by
briefly (< 1 second)
pressing the
"M"
button again.
After confirming the change, the display automatically jumps to the
measuring menu of the (newly) selected measuring mode. This removes
the values of the previous measuring mode from the display. Any stored
"
Max
" or "
Min
" values remain in the memory of the respective
measuring mode.
Now a new measurement can be performed by pressing and holding
(> 2 seconds)
the "M" button
The Hydromette BL Compact TF-IR 2 has 7 different setting modes. The selected mode changes the
display of the measuring menu. Depending on the mode, the appropriate physical dimension is also
Measuring
Menu
Press Down button
once
Figure 5-6: Display of the "Dew point IR" measuring mode
Figure 5-7: Display after a measuring mode change
