G&D VisionXS-F-DP-HR, Инструкция по установке и эксплуатации

Страница: 177 / 224

Configuration
G&D VisionXS-F-DP-HR · 61
English
Configuration of channel auto-switching
If the connection to the counterpart gets lost, the console module can automatically
switch to the other channel.
How to configure the channel auto-switching:
IMPORTANT: The activation of the
Transm. Redundancy
feature, an additional
SFP
transceiver
and the connection to a second console module are prerequisites for this
operation option.
IMPORTANT: Since the console module is identified by the same UID on both tras-
mission channels, it is not permitted to connect both channels to the same counter-
part.
OSD
1. Press
Alt+Num
(
default
) to open the OSD.
2. Select the row
Console utility
and press
Enter
.
3. Under
Channel auto-switching
press
F8
to select on of the following options:
never
 The channel accessed by the user is maintained in case of a
disconnection (
default
).
online
 If a connection is terminated, the device auto-switches to the
other channel if this channel has an active connection.
always
 If a connection is terminated, the device auto-switches to the
other channel regardless of the connection status of the other
channel.
4. Press
F2
to save your settings.