G&D VisionXS-F-DP-HR, Инструкция по установке и эксплуатации

Страница: 131 / 224

Installation
G&D VisionXS-F-DP-HR · 15
English
Establishing a connection to the computer module
Transmission 1|Tx: Insert the LC plug of a fibre optic cable connected to the Transmis-
sion|Rx interface of the computer module or to one of the Dynamic Ports of a compa-
tible matrix (see page 5).
Transmission 1|Rx: Insert the LC plug of a fibre optic cable connected to the Transmis-
sion|Tx interface of the computer module or to one of the Dynamic Ports of a compa-
tible matrix (see page 5).
IMPORTANT: The device uses components with laser technology which comply
with laser class 1.
Never stare directly into the beam when wearing optical instruments!
NOTE:
Remove the protection caps from the Transmission interfaces and the cable
plugs.
NOTE: The activation of the Transm. Redundancy feature activates the Transmission 2
interface.
To use the
Transmission 2 interface, you need an additional SFP transceiver.
Choose the right SFP transceiver for your variant of the VisionXS-F-DP-HR series. The
Transm. Redundancy options contain both, a corresponding SFP transceiver and the
Transm. Redundancy feature.
Use the Transmission 2 interface to establish a connection with a second counter-
part.
Transmission 1 Service Pwr Main Power Transmission 2 Red. Power Network Service Pwr Main Power Transmission 2 Red. Power Network