G&D VisionXS-F-DP-HR, Инструкция по установке и эксплуатации

Страница: 173 / 224

Configuration
G&D VisionXS-F-DP-HR · 57
English
Changing your password
How to change the password of you user account:
Selecting the language
The specified system language is assigned to all user accounts by default . If required,
you can permanently assign a (different) language to each user account.
How to set the language:
IMPORTANT: The OpenAccess operating mode is set by
default
. In this operating
mode, access to the KVM extender is
not
protected by authentication. Information
on the operating modes can be found in chapter
Changing hotkeys
on page 58 ff.
OSD
1. Press Ctrl+Num ( default ) to open the OSD.
2. Press F10 to open the Personal Profile menu.
3. Select the Change password entry and press Enter .
4. Enter the new password into the Change own password menu:
New  Enter your new password.
Repeat  Repeat your new password.
5. Press F2 to save your settings.
NOTE: All language settings apply to both the web application and the OSD of the
device.
If the OSD does not support the selected language, the OSD will be displayed in
English.
OSD
1. Press
Ctrl+Num
(
default
) to open the OSD.
2. Press
F10
to open the
Personal Profile
menu.
3. Under
Language
press
F8
to choose between the following options:
from system
 Use the system language
[Selection]
 Use the selected language
4. Press
F2
to save your settings.