G&D PersonalWorkplace Pro KVM, Руководство по установке, Страница: 45 / 56

Getting started
G&D PersonalWorkplace-Controller Pro Video · 15
English
Commissioning
After the first start of the device, all video inputs are displayed on the output moni-
tor (default setting).
Checking or changing the general configuration
Using the tabs of the web application, you can set up and manage the device.
Follow the instructions in the separate
Operation Manual
to successively configure
these settings:
1. On the tab
Configuration
, select the option
Display Arrangement
.
Here, you can change from
default mode (legacy mode)
into
dynamic mode
.
In addition, you can configure the number, the resolution and the behavior
(
expanded desktop
) of the monitors.
2. On the tab Configuration , select the option Display Settings
and follow the instructions.
Figure 1: Displaying all video inputs on a monitor
(Fig. similar, here: PersonalWorkplace-Controller Pro KVM)
NOTE: The
Operation Manual
is continuously updated and published on the G&D
website (
www.gdsys.com
).
NOTE: Now the device restarts.