G&D PersonalWorkplace Pro KVM, Руководство по установке, Страница: 33 / 56

The »PersonalWorkplace-Controller« series
G&D PersonalWorkplace-Controller Pro Video · 3
English
The »PersonalWorkplace-Controller«
series
You can display the video signals of multiple sources simultaneously on the moni-
tors connected to the PersonalWorkplace-Controller .
Place the monitors according to your requirements and arrange the video signals on
the monitors simultaneously as you like. You can scale and frame each video signal
individually and/or define the section to be displayed. It is also possible to adjust the
arrangement of the video signals during operation.
Available variants
The PersonalWorkplace-Controller is available in three different variants:

PersonalWorkplace - Controller Basic KVM
 PersonalWorkplace - Controller Pro KVM
 PersonalWorkplace - Controller Pro Video
IMPORTANT:
Only when using a KVM variant, you can operate the connected comput-
ers directly via the console of the PersonalWorkplace-Controller .
NOTE:
In default mode or legacy mode (see page 7), you can equip all variants with up
to five output monitors with the aspect ratios 16:9 and 16:10 .
The following resolutions are generally supported:
 3840 × 2160
(16:9, 8.3 MP)
 2560 × 1600 (16:10, 4.1 MP)
 2560 × 1440
(16:9, 3.7 MP)
 1920 × 1200 (16:10, 2.3 MP)
 1920 × 1080
(16:9, 2.1 MP)
Further resolutions are possible when using the dynamic mode (see page 7).
IMPORTANT:
In default mode , check if the max. pixel grid of all monitors complies
with the supported pxiel grid ex works (see page 18) listed in the technical data or if you
can expand the required pixel grid for a fee.
ADVICE: The entry Configuration > Display Arrangement in the web application shows
you the license information and a list of displays in use.