G&D PersonalWorkplace Pro KVM, Руководство по установке, Страница: 37 / 56

Preparation
G&D PersonalWorkplace-Controller Pro Video · 7
English
Planning the maximum pixel area, number of output
monitors and virtual outputs
The PersonalWorkplace-Controller supports two different output modes: standard mode
(legacy mode) and dynamic mode .
Standard mode (legacy mode)
In standard mode (legacy mode) up to five output monitors with fixed aspect ratios of
16:9 and 16:10 are supported.
The variant PersonalWorkplace-Controller Pro Video can managea maximum pixel area
of 16 MP as standard in this mode.
For example, in this mode you can display in the following resolutions on the con-
nected output monitors:
 2 × 3840×2160 (16:9, 8.3 MP)
 4 × 2560×1600 (16:10, 4.1 MP)
 1 × 3840×2160 (16:9, 8.3 MP) and 4 × 1920× 1200 (16:10, 2.3 MP)
Dynamic mode
In dynamic mode two monitors with any aspect ratio are supported as standard, or two
virtual outputs.
In this mode, for example, you can connect two output monitors with the following
pixel areas:
 5120×1440 (32:9, 7.4 MP)
 3840×2160 (16:9, 8.3 MP)
 2560×1600 (16:10, 4.1 MP)
ADVICE: You can purchase additional display licences (article number: A8200053 )
to expand each pixel area by an additional 8 MP .
NOTE:
The maximum available pixel area is 8192×4096 .
ADVICE:
For each additional display licence you purchase (article number:
A8200053 ), you can connect one additional output monitor or use one additional
virtual output.
NOTE: The maximum available pixel area is 8192×8192 .