G&D MultiPower-6-NT, Руководство по установке

Страница: 40 / 60

Status displays
8 · G&D MultiPower-6-NT
Status displays
The LEDs on the front and the back panel of the
central power supply show the device status and
the load of active devices.
Section LED Status Meaning
Ident. on On as soon as the LED has been activated via
web application.
Network yellow on The connection to the network has been success-
fully established.
off A connection could not be established.
green flickering Network activity.
off No network activity
Load The load of the active devices is displayed in an LED
scale.
Four green and two yellow LEDs highlight the reach-
ing of the maximum load.
If the maximum load is exceeded, one or two red
LEDs light up.
Note:
If one or two red LEDs indicate that the temper-
ature within the device is too high, make sure to cool
the device.
Status Ready on Device is ready for operation.
off Device is not ready for operation.
System green Device is ready for operation.
blinking,
green
Executing update.
fast blinking,
green
Device is reset to default settings after pushing the
Reset button for a long time.
red Internal error
Power Red. on The power pack is turned on and supplies the
required voltage.
off The power pack is turned off, or there is no connec-
tion to the mains.
Main on The power pack is turned on and supplies the
required voltage.
off The power pack is turned off, or there is no connec-
tion to the mains.
Network Ident.
Ready
System
Status Power
Red.
Main
Load