G&D MultiPower-12-NT, Руководство по установке

Страница: 42 / 60

Initial configuration of the network settings
10 · G&D MultiPower-12-NT
Initial configuration of the network
settings
The basic requirement for accessing the web application is the configuration of the
network settings of the device on which the web application is operated.
Establishing a connection to the network interface
How to connect a computer to the network interface of the central power supply:
1. Use a category 5e (or better) twisted pair cable to connect the network interface
of any computer to the central power supply’s
Network
interface.
2. Make sure that the IP address of the computer’s network interface is part of the
subnet to which the IP address of the device belongs.
3. Turn on the central power supply.
Starting the web application
How to configure the settings of a network interface:
1. Start the computer's web browser and enter the URL
192.168.0.1
in the address line.
NOTE: In the defaults, the following settings are pre-selected:
 IP address: address is obtained via DHCP (fallback: IP address 192.168.0.1)
 global network settings: settings obtained using DHCP
NOTE: Use the IP address 192.168.0.100 , for example.