Switching
11
· G&D DVIMUX2-DL-USB
Switching
You can either use the two buttons on the front panel of the device or key combina-
tions to switch between different channels.
Keyboard and mouse inputs are forwarded to the computer of the active channel.
The video signal of the active computer is displayed on the console monitor.
Switching KVM channels
Switching via buttons
How to use the buttons on the device to switch to a certain channel:
Press the button of the channel you wish to activate.
Switching via key combinations
How to use key combinations to switch to a specific channel:
Press
Select key
on the console keyboard.
The default settings allow you to switch between channels by pressing
Ctrl
and the
select keys
1
to
2
.
NOTE:
In the default settings of the KVM switch, KVM data
and
the data of
devices connected to the »USB 2.0 Devices« interface are forwarded to the com-
puter of the active channel.
Enable the USB hold function (see page 43) if you want to permanently switch the
data of devices connected to the »USB 2.0 Devices« interface to a defined channel.
The permanent switching of these devices (see page 15) remains the same even
when switching the KVM channel.
IMPORTANT:
Switching between the channels takes place if the pressed key combi-
nation is released.
NOTE:
If one of these key combinations interferes with a key combination of an
installed application program, the key combination of the KVM switch can be
adjusted (see page 24).
Содержание DVIMUX2-DL-USB
Страница 51: ...Deutsch...
Страница 99: ...English...
