G&D DP1.2-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 208 / 240

Configuration
G&D DP1.2-Vision-IP-Fiber · 83
English
Active console after starting an extender
When selecting the
Image display
option
Permanently off
(see page 81 f.) at both the
computer
and
the console module,
both
modules do not show an image after restart-
ing the extender.
Only after an input is made at the console, its image is displayed on the monitor.
The setting
Active at startup
allows you to define a module whose image display you
want to activate
immediately
after starting the extender.
How to select whether and on which module the image display is activated after
restarting the extender:
OSD
1. Press
Ctrl+Num
(
default
) to open the OSD.
2. Select the row
System setup
and press
Enter
.
3. Select one of the options given under
Active at startup
:
none
 After restarting the extender, the image display of both modules is
switched off (
default
).
CPU  After restarting the extender, the image display of console
connected to the computer module is activated.
CON
 After restarting the extender, the image display of the console
connected to the console module is activated.
4. Press
F2
to save your settings.