G&D DP1.2-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 150 / 240

Establishing a KVM-over-IP™ connection for the first time
G&D DP1.2-Vision-IP-Fiber · 25
English
Configuring a KVM-over-IP connection
The
IP address
of the console module (host) as well as the
control port
of the computer
module must be specified to establish a
KVM-over-IP
connection through the com-
puter module.
The configuration of both the
communication ports
and the
data ports
are automatically
exchanged between the two modules.
How to configure a KVM-over-IP connection:
1. Use the remote hotkey
Ctrl
+
Num
to open the OSD of computer module.
2. Select the entry
KVM connection
and press
Enter
.
3. Enter the following data under
Network setting
:
4. Press F2 to save your settings.
NOTE: The configuration of both the communication ports and the data ports are
automatically exchanged between the two modules.
Control port: Enter the number of the port you want to use.
Communication port: Enter the number of the port you want to use.
Data port: Enter the number of the port you want to use.