G&D DP1.2-Vision-IP-Fiber, Инструкция по установке и эксплуатации

Страница: 131 / 240

Package contents
6 · G&D DP1.2-Vision-IP-Fiber
Signal transmission and transmission length
G&D’s KVM-over-IP™ technology makes it possible to transmit signals between the
computer and the console module compressed and encrypted (AES-128) using
Gigabit Ethernet (Layer 3).
If the bandwidth of the Gigabit Ethernet is sufficient, the video signal is reproduced
in a loss-free video quality and almost without any latency. By means of manual
bandwidth management you can adapt the transmission to different bandwidth
requirements (see Limiting the bandwidth on page 32).
When observing the max. length of sections between two active network components
(see section Features of transmission modules in the chapter Technical data ), the entire
transmission length is unrestricted.
Package contents
Standard package contents computer modules
 1 × computer module ( DP1.2-Vision-IP-Fiber-CPU )
 1 × power cable ( PowerCable-2 Standard )
 1 × video cable
 1 × USB device cable ( USB-AM/BM-2 )
 2 × audio cable ( Audio-M/M-2 )
 1 × serial connection cable ( RS232-M/F-2 )
 1 × service cable ( USB-Service-2 )
 1 × EasyStart flyer
 1 × »Safety instructions« flyer
Standard package contents console modules
 1 × console module ( DP1.2-Vision-IP-Fiber-CON )
 1 × power cable ( PowerCable-2 Standard )
 1 × EasyStart flyer
 1 × »Safety instructions« flyer