G&D DL-Vision(M/S)-AR, Инструкция по установке и эксплуатации

Страница: 25 / 56

Configuration
G&D DL-Vision(M/S) · 21
Basic operation of the web application
The
Config Panel
web application provides a graphical user interface to configure and
monitor the KVM extender.
The web application can be applied on a computer with installed
Java Runtime Envi-
ronment
. Use one of the supported web browsers to run the application.
Starting the web application
How to start the
Config Panel
web application:
1. Enter the following URL in the address bar to call the web application:
https://[IP address of the user or computer module]
Security advices for the web browser
The KVM extender stores an SSL certificate, which enables the user or the web
browser to authenticate the opposite site.
The web browser and Java Runtime Environment ask you to confirm this certificate.
The provided certificate contains the following features:
NOTE: The separate manual provides information about system requirements, the
required configuration of the network interfaces atthe DL-Vision(M/S) devices and
the operation of the web application.
NOTE: If the
Config Panel
web application is started via a “simple” http connection,
a message informs the user that the connection can only be established via a
secure https connection.
After 10 seconds, the user is automatically forwarded to a secure https connection.
MD5 fingerprint:
47:F0:FF:87:96:84:D7:C8:63:43:6D:77:26:64:59:CD
SHA1 fingerprint:
68:92:9F:83:04:CD:7A:12:ED:2B:FE:34:0F:DF:BA:4B:0C:EF:47:30