G&D DL-Vision(M/S)-AR, Инструкция по установке и эксплуатации

Страница: 42 / 56

Configuration
38 · G&D DL-Vision(M/S)
Enabling or resetting a PS/2 mouse
Unlike USB mouse devices, PS/2 mouse devices do not support the hot plug tech-
nology. You can therefore insert the PS/2 plug during operation but it may be pos-
sible that the computer does not detect the input device.
To activate or reset the PS/2 mouse, the KVM extender can send a special com-
mand to the computer.
Since the commands differ depending on the used mouse type and the installed ope-
rating system, we provide four different setup keys.
How to activate or reset the PS/2 mouse:
NOTE: These functions can only be perform in the setup mode.
Setup
-Modu
s
1. Press the key combination
Backspace
(default:
Ctrl+Backspace
) to
enable the setup mode.
If the hotkey delay is active, press the key combination during the adjusted time (default: 7
seconds)
.
2. Press one of the setup keys listed below to enable or reset a particular PS/2
mouse:
M
 PS/2 mouse of a Linux computer
I
 PS/2 wheel mouse of a Linux computer
E
 PS/2 wheel mouse with additional keys of a Linux computer
R
 PS/2 mouse interface of a Windows computer