G&D DL-DVI-Vision-Fiber-AR-CON, Инструкция по установке и эксплуатации

Страница: 113 / 136

Configuration
G&D DL-DVI-Vision-Fiber · 42
English
Keyboard required to start the user module
In the default settings, the user module starts even without a keyboard. As an alter-
native, the user module can interrupt the starting process when no keyboard is con-
nected. After you connect a keyboard to the user module, the starting process is
continued.
How to configure the starting behaviour without a keyboard connected to the
user module:
OSD
1. Press Ctrl+Num (default) to open the on-screen display.
2. Select the row Console setup and press Enter .
3. Under Keyboard required press F8 to select one of the following options:
no  continue starting process without a keyboard ( default ).
yes  interrupt starting process without a keyboard..
4. Press F2 to save your settings.
Config
Panel
1. Click on KVM Extenders > [All Extenders] on the directory tree.
2. Double-click the computer module of the KVM extender you want to con-
figure.
Click on the tab Remote > General .
3. Under Keyboard required select one of the following options:
No  continue starting process without a keyboard ( default ).
Yes  interrupt starting process without a keyboard.
4. Click OK to save your changes.