G&D DL-DVI-Vision-Fiber-AR-CON, Инструкция по установке и эксплуатации

Страница: 101 / 136

Configuration
G&D DL-DVI-Vision-Fiber · 30
English
Related topics:

Operating the KVM extender exclusively on page 14
 Changing the video mode of consoles on page 30
Changing the video mode of consoles
In the standard configuration of the KVM extender, the computer’s image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also define that the image of the other console is deactivated during con-
sole inputs.
The image of the other monitor is shown again as soon as the user has finished their
inputs at the console.
Conf
ig
Panel
1. Click on KVM Extenders > [All Extenders] on the directory tree.
2. Double-click the computer module of the KVM extender to be configured.
3. Click on the tab Local if you want to adjust the right for the local console (at
the CPU module).
Click on the tab Remote > General , if you want to adjust the right for the
remote console (at the CON module).
4. Under Permanent Access mode select one of the following options:
Enabled  right for exclusive access is granted ( default )
Disabled  right for exclusive access is denied
5. Click OK to save your changes.