G&D ControlCenter-IP 2.0, Руководство по установке

Страница: 52 / 60

Reset button
20 · G&D ControlCenter-IP 2.0
Reset button
The Reset button is placed on the front panel of the IP matrix switch. This button
allows you to reset the default settings and disable the netfilter rules.
Resetting the default settings
Pressing and holding the button during the booting process resets the default settings
of the IP matrix switch.
How to reset the default settings of the IP matrix switch:
1. Turn off both power packs of the IP matrix switches.
2. Press and hold the Reset button on the front panel of the device.
3. Keep the button pressed and turn the device on.
4. Release the button when the green Status -LED starts blinking.
NOTE: To prevent you from pressing the button by accident, you are required to
use a thin, pointed object for pressing the button.
NOTE:
After the function has been carried out, the default settings of the IP matrix
switch do apply again. However, the purchased premium functions remain unal-
tered.
NOTE:
You can also use the Config Panel web application to reset the default settings.