G&D ControlCenter-IP 2.0, Руководство по установке

Страница: 43 / 60

Installation
G&D ControlCenter-IP 2.0 · 11
English
Installing and connecting computer modules
 Connect the target computer to the different computer modules.
The steps required to connect these devices are described in the EasyStart flyer of
the matrix system and the manual supplied with the modules.

Connect the
Transmission
interfaces of each individual computer module to the
Gigabit Ethernet.
IMPORTANT: The
Fiber
variants of the target modules use components with laser
technology which comply with laser class 1.
They meet the requirements in accordance to
EN 60825-1:2014
as well as
U.S. CFR 1040.10
and
1040.11
.
Mind the following instructions when dealing with laser beams:
 Avoid direct eye exposure to beam
on page 4
 Always connect optical connections or cover them with protection caps
on page 4
 Only use G&D certified transmission modules
on page 4
NOTE: The manuals of the modules are available on the website
www.gdsys.com/en
in the section
More from G&D
>
Manuals
>
KVM-over-IP extender system manuals
.