Gana GN-708VN, Руководство пользователя

Страница: 6 / 18

10
<Quad Display> <Full DIsplay>
<Auto Sequence>
<Auto sequence> time can set in the Menu ‘Setup’ —> ‘Screen’ —> ‘Sequence’.
If user set camera off in ‘Camera’ Menu, it will not display on Auto mode. How-
ever, when camera(s) is not connect to DVR, it will be displayed blue screen
that channel. If cameras connected all, user must check BNC connection or
camera status. If you make disable camera in camera setting menu, the screen
will display black screen with that channel.
When DVR run recording, it display camera icon left side bottom on the screen.
User can see status of DVR.
When user want to stop auto mode, just press channel button or mode button
but remote controller has only one mode button so user can press mode button
again then it display each mode, Quad mode and Auto mode.
IV. HOW TO USE
11
4) LIST Button
It shows happened events by listing
events. When powered-on & off,
started recording & stopped
recording, it makes lists in order for
user to check what has been recored
and what is recording.
To play event in list, use
▲
,
▼
button
to move cursor, and
▲
,
▼
button to
turn page. Total recordable scale can
be listed 127 in 13 pages. Each list is
marked in texts for user to recognize
easily. The 127th event will be
overwrited(loop) into 1st event when it recored the 127th event, and the 1st
recorded before will be erased by overwrited. Above on 127th event, this rule
applied.
5) REC Button
REC is for recording. The picture
shows 8 camera’s recording basi-
cally. The red camera figure from
right paused screen shows that the
recording process, it will disappear
when the recording stops. The date
and time of record are under from
light picture, The mark “ 97% ”
shows the space recorded. So in
other words, it shows that the 3%
space of hard disk drive is remained
but after 100% usage, it will start
from 0% with circulate icon. That mean hard disk is overwriting but data only
erase from beginning point so user can see all data remained (If user play dur-
ing recording, always change begin time and end time.)
User can choose overwrite enable or disable in system setup menu.
IV. HOW TO USE