GS-EVB-HB-0650603B-HD
Half Bridge Bipolar Drive Switch Board
Technical Manual
_____________________________________________________________________________________________________________________
GS-EVB-HB-0650603B-HD TM Rev. 210712 © 2021 GaN Systems Inc
9
Please refer to the Evaluation Board/Kit Important Notice on page # 16
CH2:
Low side driver input
CH1:
Low side driver (IC2) output wrt VHV-
CH2:
Low side driver input
CH1:
Low side driver (IC2) output wrt VHV-
CH2:
Low side driver input
CH1:
Low side driver (IC2) output wrt VHV-
Low side driver output
Typical Turn-on Propagation Delay
Typical Turn-off Propagation Delay
Figure 6: Typical Driver output at 100kHz
3
Test results
3.1
Double pulse test
The double pulse test is used to evaluate the switching characteristics of a power switch under hard
switching but in a safe manner.
For a low side switch the setup is as shown below:
Figure 7: Double Pulse Test
The low side switch is driven with two pulses as shown below. The high side switch can be held off or
driven with the inverse of the low side gate switch (with adequate dead time).
Содержание GS-EVB-HB-0650603B-HD
Страница 18: ......
