1.
Introduction and Setup
Unpacking and In the Box
Thank you for choosing our Rosé LED 200 Zoom. For your own safety, please read this
manual before installing or using the device. This manual covers the important information on
installation and applications. Please install and operate the fixture with following instructions.
Meanwhile, please keep this manual for future needs.
In the box you will find:
•
Rosé LED 200 Zoom Fixture:
1
•
PowerCon Cable:
1
•
DMX Signal Cable
1
Mounting and Operation
Use a clamp rated for the full weight of the Rosé LED 200 Zoom to hang the fixture from the
mount(s) on the fixture’s yoke.
As an added safety measure be sure to attached at least one properly rated safety cable
to the fixture using on of the safety cable rigging point integrated in the base assembly or
on the yoke.
Features
•
Voltages: AC 100V-240V
，
50/60Hz
•
Power Consumption: 250W@230V
•
LED: Light Source: 200W
•
Cool White & Warm White COB Led
•
Manufacturers Rated LED Life: 50000 Hours
•
Full mixing of Cool and Warm White
•
DIMMER: 0-100%
•
STROBE: Electronic Strobe Variable from 1-25hz
•
ZOOM ANGLE: 5°-60°
•
CONTROL: DMX512, 3 pins interfaces w/RDM Control Protocol
•
3 Channels in standard mode Master/Slave Mode
•
Control Mode: DMX512 / Master-Slave / Auto / Sound
Rosé LED 200 Zoom – GAMMA LED Vision
Page 3 of 11
