Gamma M1-S, Инструкция, Страница: 7 / 31

The device frequently
fails to measure, or the
values measured are
too low or high.
. Fit the cuff correctly on the arm.
. Before starting measurement make
sure that clothing is not exerting
pressure on the arm. Take articles of
clothing off if necessary.
Measure blood pressure again in
complete peace and quiet.
Every measurement re-
sults in different values,
although the device
functions normally and
normal values are dis-
played.
Please re-read the clause Measuring
procedure above.
Blood pressure values
differ from those meas-
ured at the doctor’s.
Record daily values and consult your
doctor.
Note
Blood pressure is subject to fluctuations even in healthy peo-
ple. Please remember that comparable blood pressure meas-
urements always require the same time and the same con-
ditions! These are normally quiet conditions. If you follow the
correct procedures described above and still get the fluctuations
of blood pressure of more than 5 mmHg and/or you repeatedly
hear irregular pulse tones please consult your doctor.
ATTeNTION
Should any technical malfunctions arise in the blood pressure
monitor, please contact the point of sale where you bought the
device or Service Centre Gamma-Medica. Never attempt to re-
pair the instrument yourself!
Any unauthorized opening of the instrument invalidates all
warrantee claims.
6. Care and maintenance
Do not expose the device to either extreme
temperatures, humidity, dust or direct
sunlight.
Handle the cuff carefully and avoid all
types of stress through twisting or buck-
ling in order not to damage the sensitive
air-tight bubble.
Clean the device with a soft, dry cloth. Do
not use gas, thinners or similar solvents.
Spots on the cuff can be removed carefully
with a damp cloth and soapsuds. Do not
submerge the cuff in water!
Handle the tube carefully. Keep the hose
away from sharp edges.
Do not drop the monitor or treat it roughly
in any way.
Never open the monitor! Otherwise the
manufacturer’s calibration will be spoiled.
Note:
According to international standards, your monitor should be
checked for calibration every years.