Gamma 7900 Els, Руководство пользователя

Страница: 17 / 28

17
Pulling Tension
Remove excessive slack in the string before
applying tension. To apply tension to the main
string, wrap the string clockwise around the
String Guide to ensure that the proper tension
will be applied to the string.
STRINGING THE FRAME
Insert the string between the String Gripper Plates
and apply tension to the string by pressing the
Tension Lever Switch or the Foot Pedal Switch.
Pull the string towards you at a slight angle to
engage the gripper plates. As the gripper plates
slide to the left, they close and will grip the string.
The Gripper will move to the right, away from the
racquet, and gradually apply tension to the string.
To release the tension on the string depress the
tension release lever at the rear of the gripper or
use the Foot Pedal switch.
For adjustment of the parallel plates, see “Setting the Gripper Plate Spacing” on page 22.
CAUTION:
NEVER TENSION A STRING WITH YOUR FINGERS BETWEEN
THE STRING AND THE STRING GUIDE AS SERIOUS INJURY COULD RE-
SULT IF YOUR FINGER IS CAUGHT BETWEEN THE STRING AND STRING
GUIDE DURING TENSIONING.
PUSH ANY BUTTON TO RELEASE
TENSION.
NOTE: The tensioner has a built in safety that will shut down the motor if a
string is not released within 60 seconds from the time the tensioner is ac-
tivated. Note that after the motor is shut down, the set tension in the string
will no longer be maintained.