Gamma 7900 Els, Руководство пользователя

Страница: 14 / 28

14
MOUNTING THE FRAME
Mounting Stand Adjustment
When mounting a racquet, adjust the
Mounting Stands so that the white Racquet
Supports on top of the Mounting Stands fi t
inside the hoop of the racquet. Lower the
racquet over the Racquet Supports and ad-
just the Mounting Stands until the supports
just make contact with the inside surface of
the racquet at the head and throat. There is
an arrow on the face of each knob indicat-
ing the turning direction that will “Tighten”
the mounting points by moving the 2pt
Mounting Stands further apart to bring the
Racquet Supports closer to the inside sur-
face of the racquet at the head and throat. Turning the knobs in the opposite direction will
move the Mounting Stands closer together and will allow the Racquet Supports to move
away from the racquet frame.
Adjusting the Inner Racquet Supports
The white Racquet Supports are adjustable, up and
down, to accommodate all racquets and provide max-
imum support to the racquet frame. Screw the white
pads up or down so they contact the frame at a maxi-
mum height without blocking the grommet holes.
Racquet Hold Down Clamp Operation
With the lever in the up position, insert the Racquet
Hold Down Clamp pin into the hole in the center of the
Mounting Stand. Lower the Hold Down Clamp until
it just makes contact with the surface of the racquet.
Using slight palm pressure on the Hold Down Clamp
depress the racquet Hold Down Lever completely to
secure the racquet frame to the Mounting Stand.