14
NODE NUMBER:
The Node Number Section will show the number (address) of the FACP where the message
originated. Node 0 messages originate from the Network Master computer.
When “Heartbeat” is enabled in the PRIV.INI file, a Node 0 message will be generated every two
(2) minutes so the attached equipment can detect that communications with the Master are still
active
NODE NUMBER
STATUS
NUMBER OF ALARMS
DATE & TIME
ACTION
CIRCUIT NUMBER
DEVICE NUMBER
NODE NAME
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
STATUS:
The status section
will
display the condition of the reporting Node. The word
Status:
will be
followed by either
Alarm
,
Fault
,
Normal., Bus, Comm, or Control.
NODE NUMBER
STATUS
NUMBER OF ALARMS
DATE & TIME
ACTION
CIRCUIT NUMBER
DEVICE NUMBER
NODE NAME
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
NUMBER OF ALARMS
The number of alarms will be a running count of alarms generated. In an example the first alarm
generated will display
1st of 1
the second alarm would generate
2nd
, and the third
3rd
, and so
on.
NODE NUMBER
STATUS
NUMBER OF ALARMS
DATE & TIME
ACTION
CIRCUIT NUMBER
DEVICE NUMBER
NODE NAME
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
UP TO 40 CHARACTERS OF USER DEFINABLE TEXT
Technical Manuals Online! - http://www.tech-man.com
