Service Manual
19/20
1.5 Issue
Ref. NR-00008-ENG
http://www.gamapur.com
WARNING:
To Warranty that the cylinder block is well-fitted,
make sure that the retention ring is perfectly fitted in the fixing
groove. To avoid possible errors in assembly, avoid
approaching the end cap when applying pressure to the gun
after cleaning, repair or maintenance operations.
Install the cylinder clamp.
Hand-tighten the mix chamber while holding the end of the
pneumatic cylinder with a spanner.
Assemble the gun block by sliding it over the chamber and fix it to the
gun with the bolts. Make sure to fit the o-ring between the block and
the fixing plate and replace it if it is damaged. Tighten alternately to
avoid possible leaks.
Assemble the side blocks to the gun block with the corresponding
bolts. Tighten alternately to avoid possible leaks. Screw on the
diffuser.
The gun is now ready for service.
