Service Manual
10/20
1.5 Issue
Ref. NR-00008-ENG
http://www.gamapur.com
To obtain maximum output from your
MASTER
gun, it is necessary to periodically perform
certain maintenance operations.
To prevent possible injury caused by incorrect handling of the raw
materials and solvents used in the process, carefully read the safety data
sheet provided by your supplier.
Deal with the waste caused according to current regulations.
To prevent serious damage caused by the impact of pressurised fluids,
never open a connection or perform maintenance work on components
subject to pressure until all pressure has been eliminated.
Use suitable protection when operating, maintaining or being present in
the area where the equipment is functioning. This includes, but is not
limited to, the use of protective goggles, gloves, shoes and safety
clothing and breathing equipment.
The equipment includes components that reach high temperatures and
can cause burns. Hot parts of the equipment must not be handled or
touched until they have cooled completely.
To prevent serious injury through crushing or amputation, do not work
with the equipment without the safety guards installed on the moving
parts. Make sure that all the safety guards are correctly reinstalled at the
end of the repair or maintenance work of the equipment.
MAINTENANCE
