Master II Gun
Service Manual
20/21
2.0 Issue
Ref. NR-00021-ENG
http://www.gamapur.com/
WARNING:
To guarantee that the cylinder block is
correctly fixed, make sure that the retention ring is
perfectly housed in the fixing groove. To avoid any
possible error in assembly, avoid approaching the cylinder
block when pressure is applied to the gun after performing
any cleaning, repairs or maintenance work.
11.
Fit the sleeve staple and fix it with the screw to the rear of
the gun.
12.
Tighten the mix chamber by hand, using a spanner to
hold the end of the pneumatic cylinder shaft.
13.
Fit the gun block unit by sliding it through the chamber
and fix it to the gun with the fixing nut. Make sure you fit
the o-ring between the block and the sleeve, replacing it if
it is damaged.
14.
Tighten the two side cartridges. Screw down the diffuser.
15.
Start the gun.