Master II Gun
Service Manual
4/21
2.0 Issue
Ref. NR-00021-ENG
http://www.gamapur.com/
When working with the gun, it is essential to dress suitably and use personal protection
equipment, including the unlimited use of gloves, protective goggles, safety footwear and face
masks. Use breathing equipment when working with the gun in enclosed or insufficiently
ventilated atmospheres. The introduction and monitoring of safety measures must not be limited
to those described in this manual. Before starting to use the gun, a rigorous analysis must be
made of the risks derived from the products to be dispensed, the type of application and the
working environment.
The gun forms part of the projection equipment, which is why all safety measures must be taken
that are provided for the start-up use of the equipment, in addition to all specific measures for
the use of the gun.
Carefully read the safety data sheet provided by your supplier to prevent
any possible injury caused by incorrect handling of the raw materials and
solvents used in the process.
Deal with all waste caused according to current regulations.
To prevent serious damage caused by the impact of fluids under
pressure, never open a connection or do maintenance work on
components subject to pressure until you are sure that all pressure has
been eliminated.
Use suitable protection when operating, maintaining or simply being in
the area where the equipment is working. This includes, but is not limited
to, the use of protective goggles, gloves, shoes and safety clothes and
breathing equipment.
The equipment includes components which reach high temperatures and
may cause burns. The hot parts of the unit must not be handled or
touched until they have completely cooled.
To prevent serious injury caused by crushing or amputations, do not work
with the equipment if the safety protections of the moving parts are not
duly installed. Make sure that all safety protections are correctly fitted
after carrying out repair or maintenance work on the equipment
