GS-94D and GS-94T
1.
Repeat steps 1 to 6 as shown in GS-94S.
2.
Screw part (D) to part (E). part (C) to part (D) and part (H) into part
(C).
3.
Screw bracket (J) into part (H) using the provided screws as shown in
Fig. 3.
4.
Repeat step 3, two times in model GS-94D and three times in model
GS-94T.
5.
Screw part (K) on top of part (H) for GS-94D or (I) for GS-94T.
Replacing the Batteries
(After several years of use, the batteries may need replacing).
1.
Remove the top (A) from the fixture (B)
by releasing the 2 screws (Fig. 2).
2.
Make sure the ON/OFF switch is in the “OFF” position.
3.
Release the 3 screws on the silver reflector and remove
the old batteries. Make sure the new batteries are
high quality –1 x Li-ion Battery Pack
(3.2 Volt / 3,000 mAh).
4.
Install the new batteries into the battery compartment.
5.
Reassemble the unit by reversing the above procedure.
Fig. 3
