2
PLANTER with EZ Anchor Installation Instructions
PLANTER Installation Instructions
2.1 Place the planter on a flat and sturdy location.
2.2 Place the metal net (D) over the planter to add stability.
2.3 Place the pole through the net and screw the pole tightly to the planter.
Position rocks at the bottom of the planter for additional stability.
1.1
Put in the four screws that are provided
through the EZ Anchor and tighten
them with the 4 nuts as shown.
1.2
Use the Turning Bar (A) and Leveling
Tool (in the EZ Anchor) to screw it in
the ground as level as possible.
1.3
Stop turning once Part (B) is flat with ground level.
1.4
Remove the Turning Bar (A).
1.5
Put the planter over the EZ Anchor you assembled.
1.6
Use the four washers (C) and tighten them with
the 4 nuts provided.
1.7
Place the metal net (D) over the planter to add stability.
1.8 Place the pole through the net and screw the pole tightly to
the planter.
C
D
D
J
K
F
G
H
A
B
