4
GS-105W
Note: Installing the light on a wall may limit the solar panel for sun exposure.
Make sure the lamp is mounted so direct sun exposure is available.
1. Use a drill to make two holes in the desired surface.
2. Place the screw anchors into the holes and place the lamp in line with the
holes and secure it with the provided screws.
3.
Detach Part
(H)
from Part
(F)
4. Attach the base
(H)
to the
wall bracket
(F)
with the
nut
(Fig.4)
.
5. Attach the fixture
(D)
to the base
(H)
with the four supplied screws, as shown
in
(Fig.5).
After assembling your specific bracket, follow these steps to finish the installation of the
unit. These steps apply to ALL three brackets:
Fig.4
Fig.5
1. Place the window frame
(C)
into the fixture
(D).
2. Turn on the switch to desired setting.
3. Attach the top
(B)
to the fixture
(D)
with the two supplied screw caps.
4. Screw on the top of the light
fixture
(B)
the finial
(A).
H
H
F
D
D
C
B
D
B
A
