3
Step 3: Mounting the light on the wall (Fig 4)
You are ready to mount the light fixture on the wall.
1)
Use a drill to make two holes in the wall where the
lamp will be mounted. (use the wall mount as a
template for drilling locations)
2)
Place the anchors into the holes and place the lamp
in line with the holes.
3)
Secure using provided screws.
Replacing the Battery:
(After several years of use, the battery may need replacing.)
1.
Unscrew the two screw caps and detach the top (Fig 3).
2.
Make sure the Low/OFF/High switch is in the OFF position (Fig 5).
3.
Pull the battery out until you can see the battery connector.
4.
Unclip the connector and remove the old battery
.
5.
Make sure the new battery is a Gama Sonic
–
3.2V/1,500mAh, Li-ion
Rechargeable battery with same connector.
6.
Clip on the new battery and install it into the battery compartment.
7.
Repeat steps 3 to 6 for the second battery.
8.
Turn the light back ON (see
Step 2
for more details).
9.
Reattach the top and secure it with the two screw caps.
Fig. 5
Fig. 4