3. Assembly Instructions
4. Operation Instructions
(follow these instructions for each lamp head)
5. Replacement Parts
page 3
• Place Part (A) into Part (B)
• Secure Part (B) to Part (A) by aligning the four tabs and
turning Part (B) so it locks into Part (A)
• Insert Part (C) into Part (A) by pressing down firmly.
• Attach the three pole sections (Part D) to each other by
twisting them clockwise. Attach the completed pole section
to Part (C) by twisting clockwise.
• Attach both parts (E) to part (F) using the 8 supplied screws.
• Attach the assembly of Parts (E) and (F) to the top of part
(D) and secure by twisting in part (G) clockwise through the
center of part (H).
• Install Part (H) on Parts (E) and (G) by sliding them onto the
tubes.
• After installing the GS Solar LED Bulb into Part (I) and turning
the unit on, secure part (I) to Part (H) by twisting clockwise.
• Insert the GS Solar LED Bulb into the Top (Part I)
• Locate the operation switch on the underside of the lamp
head (I).
• Switch the lamp to either the Low or High setting according
to your preference:
- Low = Softer light output and longer duration
- High = Brighter light output
• The lamp will operate automatically at dusk.
Replacement Batteries and Bulbs are available at
www.gamasonic.com
or via our Toll Free number:
+1-800-835-4113.
Your Lamp can use the following bulbs:
D46WW05W – included bulb with Warm White LEDs (2700K)
F30WW05W – Flame bulb with simulated flame LEDs
Your Lamp uses the following battery:
SB32V05
A
B
D
D
F
F
G
H
H
I
I
I
C
D
E
E
A
B
