background image

SOLAR  LIGHTS 

CARE AND USE INSTRUCTIONS 

 

1

 

 

PARTS LIST  

 

Please do not throw away any packing material until all parts are verified as present. 
Please check for ground stakes and poles on all sides of packing materials. 

 

 

INSTALLATION

 

 

SELECT YOUR LOCATION 

Solar products should be positioned where direct sunlight can be absorbed onto the 
face of the solar panel for as many hours as possible throughout the day.  Shadows  
cast by homes, trees and structures will restrict the charging and effect the total hours of 
operation of the lights.

 

 
 
 
 
 

 
PART #

 

 

PART DESCRIPTION

 

 

QUANTITY

 

2474US1GLS 

 Glass shades 

 

 
 

 
 
2474US2VP 
 

 

 
 
 
 
 

                      

2-light arch pole

 

 

 
 
 
 
 

 
2474US4VP 

 

  

Poles for remote solar panels 

 

 
 

 
 

2474US5GS 

 

 

 

 
 

2474US3GS 

 

 
                     

Metal ground stakes 

 
 

 

 
 

 

NiMh rechargeable batteries  
(pre-installed)

 

 

1 x AA 1.2 V 450 mAh

 

Remote solar panel 
ground stakes 

Summary of Contents for GX-2474-Twin

Page 1: ...unlight can be absorbed onto the face of the solar panel for as many hours as possible throughout the day Shadows cast by homes trees and structures will restrict the charging and effect the total hours of operation of the lights PART PART DESCRIPTION QUANTITY 2474US1GLS Glass shades 2 2474US2VP 2 light arch pole 1 2474US4VP Poles for remote solar panels 1 2474US5GS 1 2474US3GS Metal ground stakes...

Page 2: ...l it GROUND STAKES Pre drill a hole into the ground using a screwdriver Do not make the hole larger than the ground stake Insert assembled solar light into the pre made hole Do NOT use a hammer on the ground stakes as you could damage the item BATTERY INFORMATION INSTALLATION REPLACEMENT INSTRUCTIONS 1 Slide the power switch to the OFF position 2 Access the battery compartment by unscrewing the re...

Page 3: ...intended use Replace all batteries of a set at the same time Clean the battery contacts and also those of the device prior to battery installation Ensure the batteries are installed correctly with regard to polarity and Remove batteries from equipment that will not be used for an extended period of time Remove used batteries promptly SUGGESTIONS Rechargeable batteries need to be charged for about ...

Page 4: ...ghts shine near or into the photocell these lights may trigger the light sensor and the lights may turn off Bright lights can act like daylight and keep the system from starting 5 Battery s may need to be changed and vary by use temperature weather conditions and heat Replace batteries with the exact same type of rechargeable batteries 6 Make sure the batteries are fully charged It is important to...

Reviews: