Ventilation operation
1.Start the air conditioner by depressing the ON/OFF button;
2.Depress the MODE button to select VENTILATION mode;
3.Depress air speed button to select between “Auto→Low speed
→ Middle speed→High speed”;
4.Stop the air conditioner by depressing the ON/OFF button
again.
Note: Setting temperature is not possible under VENTILATION
mode and there will be no temperature display.
Timer ON operation
①
With the air conditioner and remote control off, press the timing button, the display screen of the
remote control will display “Timer ON”, with the time and time range displayed in the number
zone:(0.5-24)hours
；
②
Depress set button to adjust the time by 0.5 hour per
depressing before 10 hours and 1 hour per depressing
afterward, to the desired time;
③
Depress the timing button again to set the function of
“Timer ON”.
④
Depress other function buttons to set the operation
condition after the starting of the air conditioner
(including mode, temperature, air damper, air speed,
etc.), the display screen will display and hold all your
settings until the set time is reached , then the air
conditioner will start and run under preset conditions.
Timer OFF operation
①
With the air conditioner and remote control on, press
the timing button, the display screen of the remote
control will display “Timer OFF”, with the time and
time range displayed in the number zone: (0.5-24)hours
；
②
Depress set button to adjust the time by 0.5 hour per
depressing before 10 hours and 1 hour per depressing
afterward, to the desired time;
③
Depress the timing button again to set the function of
“Timer OFF”.
5.2.2.3Cancellation of the timing function
With the air conditioner under timing mode, depressing timing button or ON/OFF button will cancel the
timing mode.
