Version 1, 18 December 2020, Page
9
of
12
5. Type of controller (left drop-down menu)
-
For the PB2 controller only the PB2
selection is correct. Please do not change
the selection for the PB2 controller
6. Chanel select (middle drop-down menu)
-
The PB2 controller has built in two channels. They
may be controlled independently or one of the
channels to be used as half flush and second
channel as full flush for a pan.
7. Designated feature drop-down menu
-
The PB2 controller can be used for
showers, basins and pans. Depend of the
feature selection setting slides will appear.
(e.g. there is only ‘Run’ time to be set for
basin, ‘Run’ and ‘Lockout’ times for pans
and
there is ‘Shower end warning’ time for
shower)
8. Settings for Basin
-
Set the channel no. of the solenoid and activation
button to be changed.
-
Set the required water flow ‘Run time’ in seconds
for the basin.
-
Set the Hygiene flush parameters if required.
-
Pres
s ‘Upload’ to upload the settings to the
controller.
-
The controller can be used in configurations: one
button
–
one solenoid, one button
–
two solenoids
or two buttons
–
two solenoids.
