Version 1, 18 December 2020, Page
10
of
12
9. Settings for pans.
-
The default configuration for a pan is two
buttons and one or two solenoids. By
marking the ‘Link pans’ the outputs will
work simultaneously.
-
Chanel 1 is to be used for the half flush and
the channel 2 for full flush.
-
Set the required time and Hygiene flush for
half flush (channel 1) and press ‘Upload’.
-
Similarly set the required time and Hygiene
flush for full flush (channel 2) and press
‘Upload’.
10. Settings for shower.
-
PB2 controller is capable of controlling two buttons
and two showers (solenoids).
-
Select channel to be changed.
-
Select desired ‘Run time’.
-
Select desired ‘Lockout time’ if required or set to
“0” if not.
-
Select ‘Shower end warning’. Recommended only if
setting a lock out time.
-
Press ‘Upload’ to store the settings in the
controller.
11. Connection menu.
-
By pressing the back arrow on Android
device, the connection screen will pop up.
-
The buttons allow to rename the
controller, set new PIN, disconnect or go to
setting screen ‘Next’.
