© Galvin Engineering Pty Ltd
Product Installation Guidelines
Version 1, 25
th
May 2022, Page
4
of 5
5.
Fit grab rail into wall mount plate and
tighten lock nut firmly.
6.
Screw flange cover to wall mount plate.
7. Cradle Installation
-
Fit the shower cradle to the grab rail as
shown.
-
Position the cradle as desired then tighten
the cover of the cradle.
8. Connect Flange Wall Outlet Elbow
-
Apply thread tape to wall spud. When
applying thread tape or sealant to the wall
spud, ensure the opening is not obscured.
Failure to do so may restrict or block the flow
restrictor, affecting the flow of water.
-
Remove spigot by loosening grub screw in
elbow.
-
Fit spigot to wall spud, ensuring the flow
regulator is in place and not damaged when
tightening the spigot.
9. Connect Flange Wall Outlet Elbow
-
Fit elbow over spigot and secure with grub
screw.
-
Using 2.5mm hex key supplied, tighten 5mm
grub screw.
10. Check Shower for correct operation
and leaks
- Connect hose and shower head ensuring
the connection is secured, then turn on water
supply. Check for any leaks.
Hex Key
Elbow
Grub Screw
Spigot
Flow Regulator
