© Copyright
Gallo Technologies
. All Right Reserved
- 9 -
52008
Year Diagrams can be found on our web site at www.GalloTech.com) If the Trigger wire is 0v when the Lock/unlock
switch is depressed then you have a Neg. (-) trigger (Fig. 4). If the trigger wire is +12v when depressing the
Lock/unlock switch then you have a Pos.(+) Trigger (Fig 5). For Pre- ’95 Audi or Mercedes Benz vacuum motor
operation use Fig. 6. For Reverse Polarity applications, were the lock and unlock wires rest at Negative Ground,
use Fig. 7.
C2: 6 PIN WIRE HARNESS DIAGRAMS: Door Locking/Unlocking Circuits
Figure 3
Figure 4
Figure 5
