15
All copying, even partial, of this manual is strictly forbidden
RG66007169 - Rev 00
2
INSPECTION, CONVEYANCE DIMENSIONAL AND SITING
2.1
INSPECTION
On receiving the unit, check that the packing is intact: the machine left the factory in perfect conditions and after thorough inspection.
Should you detect any signs of damage, immediately report them to the carrier and note them on the delivery slip.
Galletti S.p.A. must be notified of the entity of the damage within 8 days of the delivery date.
Check that the following items are present:
- starting up module,
- wiring diagram,
- warranty certificate
- make sure that this manual is intact (56 pages)
2.2
CONVEYANCE
During handling it is compulsory to check dimensions, weights, centre of gravity and anchorages. Check as well that lifting and positioning devices conform
to the current safety regulations. The unit leaves the factory screwed onto a wooden pallet, which allows it to be easily conveyed with a forklift truck.
After removing the unit from the pallet, handle it gently, without applying excessive pressure on the side panels, finned coil and fan grille. You should collect
and separate the packing materials (wood, cardboard, nylon etc.) and make them available for recycling in order to minimise their environmental impact.
Before lifting, remove the screws that fasten the machine base to the wooden pallet. The unit must be lifted using Ø 1½” GAS steel pipes at least 3mm
thick, to be inserted in the round holes on the base side members (see figure) and identified by means of stickers. Piping must protrude of at least 250-300
mm from each side, be slung with ropes of equal length and secured to the lifting hook (provide stops at the ends of the pipes to prevent the ropes from
slipping off due to the weight). Use ropes and belts sufficiently long to extend beyond the height of the machine and place spacer bars and boards on the
top to prevent damaging the sides and the top of the unit. In this phase, before the definitive position, vibration damping supports can be installed (optional).
Warning
In all lifting operations make sure that the unit is securely anchored in order to prevent accidental falls or overturning.
