ENG
19
/ 26
18
Note:
– You can change temperature by regulator
A2
during hair styling. If you set higher temperature,
wait till the control light turns green. If you set lower temperature, wait for a couple of minutes
before the temperature drops. Then you can continue hair styling.
– While heating the thermostat may cycle (the indicator light turns on and off). This is not
considered to be a defect.
– Turn the regulator only in the range of level 140 to 230
°
C. If you turn the button too much
using force, you can damage the regulation system.
–
After about 30 seconds, the straightener is ready for use.
Temperature and type of hair
Low temperature (140 – 170 °C) –
for fine, bleached or damaged hair,
Medium temperature (170 – 200 °C) –
for normal and wavy hair,
High temperature (200 – 230 °C) –
for strong, rough and curly hair.
Hair straightening
Use the hair straightener for washed and dried or slightly damp hair, never for wet hair. Before
using the hair straightener, comb the hair so that it is not disheveled. Start with styling the lower
hair first. When styling hair, do not put locks of hair that are too thick between the plates. Divide
a lock in about 5 cm of its width and put it into an open hair straightener. Then close the hair
straightener by pushing and move it slowly on the lock from roots towards hair tips. You can curl
the tips thanks to round edges of the plates upwards or downwards. Repeat the process till you
have created the required hairstyle. Let the hair cool down before the final styling.
Lock
The lock is used for safe and effective storing of the straightener in the closed position.
Locking
– close the straightener by pushing control
A8
to the position .
Unlocking
– push the closed straightener control
A8
to the position .
A7
A8
A5
A6
A4
A1
A3
A2
I
0
