Gallet BAC 525, Инструкция по эксплуатации

Страница: 16 / 28

ENG - 16
TARE FUNCTION
To weigh different loads consecutively without removing loads from the scale. Put first Load on
the scale, get weight reading. Press „ON / OFF / TARE“ button to reset the LCD reading to „0“
before adding next load. You can repeat this operation.
UNIT OF MEASUREMENT:
The unit switch is on the back of the scale. Find unit switch on the back of scale and switch the
unit between g-lb.
TURN OFF
For turn off press and hold button „ON / OFF / TARE“ for 3 seconds.
AUTOMATIC SWITCH OFF
If the scale is without using longer than 30 seconds, it automatically turns off.
WARNING INDICATORS
1. Replace new battery.
2. Scale overload. Remove item to avoid damage.Max.Weight
capacity is indicated on the scale.
BATTERY REPLACEMENT
1) This device can only be used with CR 2032 batteries.
2) Clean Battery contacts and also those of the device prior to battery installation.
3) Should product be unused for a long period of time, remove batteries.
4) Leaking batteries must be replaced immediately.
5) Remove used batteries with care
CLEANING AND MAINTENANCE
1) Clean the scale with a slightly damp cloth. DO NOT immerse the scale in water or use
chemical/abrasive cleaning agents.
2) All parts should be cleaned immediately after contact with fats, spices, vinegar and strongly
flavored/colored foods. Avoid contact with acids citrus juices.
TROUBLESHOOTING
The device is not working
- Check the rights position of battery and the polarity.
- When warning indicator shows „Lo“ replace the battery.