ENG
ENG - 25
CLEANINg AND MAINTENANCE
Always remove the power plug from the wall outlet before carrying out any maintenance.
If the suction power of your machine is getting lower, you must empty the dust container and
clean the HEPA filter. To do so, please follow the instruction below.
hOW TO EMPTy DUST CONTAINER AND REMOVE ThE hEPA fILTER
You can easily see with the transparent dust container when it must be emptied. Check the Full
dust indicator (P13) during the vacuum cleaning.
Switch off the vacuum cleaner and disconnect the plug from the mains. To do this always
pull on the plug and not on the cable.
Remove the flexible hose, press the locking buttons on the base of either side of the flexible
hose to release the lock. Pull the flexible hose out of the hose socket.
Take out the dust container by the handle from the main unit of the vacuum cleaner, (Fig.1).
Push a button on the dust container that you can use to open and empty it automatically
(bottom-down technology). To do this hold the dust container over your dustbin and press on
the empty button (Fig.2)
Fig. 1
Fig. 2
Open the Dust Container as shown Fig. 3. Take out the HEPA filter from the dust container
as shown Fig. 4. Clean the filter following the instructions in part HEPA filter cleaning. Dry
thoroughly before putting it back!
Fig. 3
Fig. 4
1)
2)
3)
4)
5)
Содержание ASP 807B
Страница 32: ...ENG 32 ...
