ENG - 24
REMOVINg ThE TELESCOPIC TUbES AND ACCESSORIES
To remove the telescope tube and accessories, hold each piece tightly and pull firmly apart..
OPERATION
Unwind the length of power cord required, then position the power cord so that it is not likely to
be walked on or pinched by things placed on or against it, finally insert the plug into the power
socket. A YELLOW mark on the power cord indicates the maximal cable length. Do no extend
the power cord beyond the RED mark. To retract the cord, press the cord rewinder button.P7
.
ON / Off Switch
1. Press the On/Off Switch button (P9) to switch the appliance ON.
2. To stop the machine, press the button P9 again.
SUCTION CONTROL
Adjust the Suction control knob (P4) on the curved handle to control
the suction. The suction will be reduced with a larger air opening.
Suction power
The suction power can also be regulated through suction control knob P11.
Low vacuum power: For curtains and delicate fabrics
Medium vacuum power: For long-pile velour carpets and textile flooring
High vacuum power: For sturdy rugs and floors etc.
AfTER VACUUM CLEANINg
Switch off the device when you have finished cleaning:
To do this press the foot button P9 on the device with your foot of by hand.
After this pull the mains plug from the socket.
To roll in the cable press cord rewinder button pedal and hold it in position. The cable will be
rolled back automatically onto the installed cable drum and disappear completely into the
device up to the plug.
The floor nozzle can be kept attached to the vacuum cleaner for ease of storage after use.
The bagless vacuum cleaner function without needing a dust bag. The sucked up dirt is forced
into the dust container by force of the air jet instead. The air is cleaned by a washable perma
-
nent filter (HEPA filter) in the dust container and an exhaust air filter.
1)
2)
3)
4)
Содержание ASP 807B
Страница 32: ...ENG 32 ...
